https://github.com/cnadler86/mp_esp_dl_models

ESP DL MicroPython Binding

This is a MicroPython binding for ESP-DL (Deep Learning) models that enables face detection, face recognition, human detection, cat detection, and image classification on ESP32 devices.

Donate

I spent a lot of time and effort to make this. If you find this project useful, please consider donating to support my work. 

Available Models

• FaceDetector: Detects faces in images and provides bounding boxes and facial features
• FaceRecognizer: Recognizes enrolled faces and manages a face database
• HumanDetector: Detects people in images and provides bounding boxes
• CatDetector: Detects cats in images and provides bounding boxes
• ImageNet: Classifies images into predefined categories
• CocoDetector: Detects objects in images using COCO dataset categories

Installation & Building

Requirements

• ESP-IDF:
  • Version 5.4.2 with MicroPython >=1.26.0
• Make sure you have the complete ESP32 build environment set up

Precompiled Images

You can find precompiled images in two ways:

1. In the Actions section for passed workflows under artifacts
2. By forking the repo and manually starting the action

Building from Source

1. Clone the required repositories:

git clone –recursive https://github.com/cnadler86/mp_esp_dl_models.git git clone https://github.com/cnadler86/micropython-camera-API.git git clone https://github.com/cnadler86/mp_jpeg.git

2. Build the firmware: There are two ways to enable the different models:

a) Using mpconfigvariant files (recommended): The models can be enabled in the board’s mpconfigvariant files (e.g., mpconfigvariant_FLASH_16M.cmake). The following flags are available:

• MP_DL_FACE_DETECTOR_ENABLED
• MP_DL_FACE_RECOGNITION_ENABLED
• MP_DL_PEDESTRIAN_DETECTOR_ENABLED
• MP_DL_IMAGENET_CLS_ENABLED
• MP_DL_COCO_DETECTOR_ENABLED
• MP_DL_CAT_DETECTOR_ENABLED

b) Using command line flags: You can enable models directly through the idf.py command using -D flags:idf.py -D MP_DL_FACE_RECOGNITION_ENABLED=1 -D MP_DL_CAT_DETECTOR_ENABLED=1 [other flags…]

Basic build command:cd mp_esp_dl_models/boards/ idf.py -D MICROPY_DIR=<micropython-dir> -D MICROPY_BOARD=<BOARD_NAME> -D MICROPY_BOARD_VARIANT=<BOARD_VARIANT> -B build-<your-build-name> build cd build-<your-build-name> python ~/micropython/ports/esp32/makeimg.py sdkconfig bootloader/bootloader.bin partition_table/partition-table.bin micropython.bin firmware.bin micropython.uf2

Module Usage

Common Requirements

All models support various input pixel formats including RGB888 (default), RGB565, and others supported by ESP-DL. You can use mp_jpeg to decode camera images to the correct format.

The pixel format can be set through the constructor’s pixel_format parameter. This value matches the ESP-DL image format definitions.

Pixel Formats

• espdl.RGB888 (default)
• espdl.RGB565
• espdl.GRAYSCALE

FaceDetector

The FaceDetector module detects faces in images and can optionally provide facial feature points.

Constructor

FaceDetector(width=320, height=240, pixel_format=espdl.RGB888, features=True)

Parameters:

• width (int, optional): Input image width. Default: 320
• height (int, optional): Input image height. Default: 240
• pixel_format (int, optional): Input image pixel format. Default: espdl.RGB888
• features (bool, optional): Whether to return facial feature points. Default: True

Methods

• run(framebuffer)Detects faces in the provided image.Parameters:
  • framebuffer: image data (required)
  Returns: List of dictionaries with detection results, each containing:
  • score: Detection confidence (float)
  • box: Bounding box coordinates [x1, y1, x2, y2]
  • features: Facial feature points [(x,y) coordinates for: left eye, right eye, nose, left mouth, right mouth] if enabled, None otherwise

FaceRecognizer

The FaceRecognizer module manages a database of faces and can recognize previously enrolled faces.

Constructor

FaceRecognizer(width=320, height=240, pixel_format=espdl.RGB888, features=True, db_path=”face.db”, model=None)

Parameters:

• width (int, optional): Input image width. Default: 320
• height (int, optional): Input image height. Default: 240
• pixel_format (int, optional): Input image pixel format. Default: espdl.RGB888
• features (bool, optional): Whether to return facial feature points. Default: True
• db_path (str, optional): Path to the face database file. Default: “face.db”
• model (str, optional): Feature extraction model to use (“MBF” or “MFN”). Default: None (uses default model)

Methods

• run(framebuffer)Detects and recognizes faces in the provided image.Parameters:
  • framebuffer: image data (required)
  Returns: List of dictionaries with recognition results, each containing:
  • score: Detection confidence
  • box: Bounding box coordinates [x1, y1, x2, y2]
  • features: Facial feature points (if enabled)
  • person: Recognition result containing:
    • id: Face ID
    • similarity: Match confidence (0-1)
    • name: Person name (if provided during enrollment)
• enroll(framebuffer, validate=False, name=None)Enrolls a new face in the database.Parameters:
  • framebuffer: image data
  • validate (bool, optional): Check if face is already enrolled. Default: False
  • name (str, optional): Name to associate with the face. Default: None
  Returns:
  • ID of the enrolled face
• delete_face(id)Deletes a face from the database.Parameters:
  • id (int): ID of the face to delete
• print_database()Prints the contents of the face database.

HumanDetector and Cat Detector

The HumanDetector module detects people in images. The CatDetector does it for cats. Both modules provide bounding boxes for detected objects.

Constructor

HumanDetector(width=320, height=240, pixel_format=espdl.RGB888) #For cats use CatDetector

Parameters:

• width (int, optional): Input image width. Default: 320
• height (int, optional): Input image height. Default: 240
• pixel_format (int, optional): Input image pixel format. Default: espdl.RGB888

Methods

• run(framebuffer)Detects people in the provided image.Parameters:
  • framebuffer: image data
  Returns: List of dictionaries with detection results, each containing:
  • score: Detection confidence
  • box: Bounding box coordinates [x1, y1, x2, y2]

ImageNet

The ImageNet module classifies images into predefined categories.

Constructor

ImageNet(width=320, height=240, pixel_format=espdl.RGB888)

Parameters:

• width (int, optional): Input image width. Default: 320
• height (int, optional): Input image height. Default: 240
• pixel_format (int, optional): Input image pixel format. Default: espdl.RGB888

Methods

• run(framebuffer)Classifies the provided image.Parameters:
  • framebuffer: image data
  Returns: List alternating between class names and confidence scores: [class1, score1, class2, score2, ...]

COCO detect

The COCO detect module detects objects in images using the COCO dataset.

Constructor

COCODetector(width=320, height=240, pixel_format=espdl.RGB888, model=CONFIG_DEFAULT_COCO_DETECT_MODEL)

Parameters:

• width (int, optional): Input image width. Default: 320
• height (int, optional): Input image height. Default: 240
• pixel_format (int, optional): Input image pixel format. Default: espdl.RGB888
• model (int, optional): COCO detection model to use. Default: CONFIG_DEFAULT_COCO_DETECT_MODEL

Methods

• run(framebuffer)Detects objects in the provided image.Parameters:
  • framebuffer: image data
  Returns: List of dictionaries with detection results, each containing:
  • score: Detection confidence
  • box: Bounding box coordinates [x1, y1, x2, y2]
  • category: Detected object class id

Usage Examples

Face Detection Example

from espdl import FaceDetector import camera from jpeg import Decoder # Initialize components cam = camera.Camera() decoder = Decoder(pixel_format=”RGB888″) face_detector = FaceDetector() # Capture and process image img = cam.capture() framebuffer = decoder.decode(img) # Convert to RGB888 results = face_detector.run(framebuffer) if results: for face in results: print(f”Face detected with confidence: {face[‘score’]}”) print(f”Bounding box: {face[‘box’]}”) if face[‘features’]: print(f”Facial features: {face[‘features’]}”)

Face Recognition Example

from espdl import FaceRecognizer import camera from jpeg import Decoder # Initialize components cam = camera.Camera() decoder = Decoder(pixel_format=”RGB888″) recognizer = FaceRecognizer(db_path=”/faces.db”) # Enroll a face img = cam.capture() framebuffer = decoder.decode(img) face_id = recognizer.enroll(framebuffer, name=”John”) print(f”Enrolled face with ID: {face_id}”) # Later, recognize faces img = cam.capture() framebuffer = decoder.decode(img) results = recognizer.run(framebuffer) if results: for face in results: if face[‘person’]: print(f”Recognized {face[‘person’][‘name’]} (ID: {face[‘person’][‘id’]})”) print(f”Similarity: {face[‘person’][‘similarity’]}”)

Benchmark results

The following table shows the frames per second (fps) for different image sizes and models. The results are based on a test with a 2MP camera and a ESP32S3.

Frame Size	FaceDetector	HumanDetector
QQVGA	14.5	6.6
R128x128	21	6.6
QCIF	19.7	6.5
HQVGA	18	6.3
R240X240	16.7	6.1
QVGA	15.2	6.6
CIF	13	5.5
HVGA	11.9	5.3
VGA	8.2	4.4
SVGA	6.2	3.8
XGA	4.1	2.8
HD	3.6	2.6

Notes & Best Practices

1. Image Format: Always ensure input images are in the right format. Use mp_jpeg for JPEG decoding from camera.
2. Memory Management:
   • Close/delete detector objects when no longer needed
   • Consider memory constraints when choosing image dimensions
3. Face Recognition:
   • Enroll faces in good lighting conditions
   • Multiple enrollments of the same person can improve recognition
   • Use validate=True during enrollment to avoid duplicates
4. Storage:
   • Face database is persistent across reboots
   • Consider backing up the face database file